THE BEST SOLUTION FOR QUICK MOLD & DIE CHANGE

MBP

Electro-permanent magnetic system for quick mold change

Full Metallic

Horizontal Rotary

Multiple Injection

Side Load

Vertical

magbo® saves daylight

Solid block construction of platens provides the best overall flatness tolerance within the thinnest possible construction parameters.
The new 30 mm magnetic platens option saves valuable machine daylight and reduces injection nozzle extension requirements.

More Uniform Clamping

Traditional clamping focuses the clamping forces around the peripheral edges of the mold.
magbo® magnetic clamping generates clamping force over the entire surface of the mold. Once the mold is magnetized it is nearly a “part” of the machine platen. This increased rigidity equates to higher quality parts, increased repeatability and less maintenance of the mold.

More Flexibility

Molds of any shap and size can be clamped without modification. Molds that will not fit in the
SPI/EUROMAP/JIS clamping envelopes are easily managed with magbo®

 

CHALLENGE
magbo®
Other Brands
RFM - Removable Full Metallic Surface
TRS - Tool Recovery System
Maximum magnetic force = 120 t / m2
Air gap performance = 90% force at 0.3 mm
Neutral Frame with no magnetism holding the press for easy installation and removal
SDS - Slide Detection System
RFR - Real Force Reading
TT / AT - Most Daylight with Slimline option
MSD - Magnetic Saturation Detection
TPM - Temperature Monitor
MI - Multiple Injection Option
CHALLENGE
magbo®
Other Brands
CSS - Current Sensing System
SLR - Side Load Rollers System
RP - Rotary Platen Option
Bi-pole = Most powerful and balanced force
with no residual magnetism
Replaceable Location Ring
Compact Control Unit
1/2” Magnetic Flux Depth
Factory Trained World Wide Service
Dual Prox. Safety System Standard
In the Field Repairs of Magnetic Plates
Quick Disconnect Control Connections

magbo® Applications

Standard Equipment Force Reading Controller

Force reading system measures the real force accurately and allows mold identification for up to 10,000 unique molds.

CUY Controller

Electrical cabinet (mm/in)

Model
Machine tonnage
Height
Width
Depth
CUY-SS
Up to 500 t
380 (14.96)
380 (14.96)
210 (8.27)
CUY-S
Up to 1000 t
500 (19.69)
500 (19.69)
210 (8.27)
CUY-M
1000 t to 2000 t
700 (27.56)
500 (19.69)
250 (9.84)
CUY-L/XL
2000 t above
1000 (39.37)
800 (31.49)
300 (11.81)

Touch screen pendant RET

Standard pendant RET (mm / in)

Length
Width
Height
280(11.02)
170(6.69)
76(3)

Standard pendant REM

Standard pendant REM (mm / in)

Length
Width
Height
140 (5.51)
140 (5.51)
80 (3.15)

MBP Technical Characteristics

Magbo
MBP 70
MBP 50
MBP 50 (TT)
Force / pole (*)
690 daN (1518 lb)
350 daN (770 lb)
350 daN (770 lb)
Pole size
70 mm (2.76 ’’)
50 mm (1.96 ’’)
50 mm (1.96 ’’)
Magnet thickness
46 mm (1.81 ’’)
42 mm (1.65 ’’)
35 mm (1.38 ’’)
Max working temperature (mold contact face)
120 °C (248 °F)
120 °C (248 °F)
120 °C (248 °F)
Depth of magnetic flux
20 mm (0.78 ’’)
10 mm (0.39 ’’)
10 mm (0.39 ’’)
Proximity sensor threshold value
0.3 mm (0.012 ’’)
0.3 mm (0.012 ’’)
0.3 mm (0.012 ’’)
Standard voltages
208V - 575V standard, 50 / 60 Hz
208V - 575V standard, 50 / 60 Hz
208V - 575V standard, 50 / 60 Hz
Mounting holes and locating ring
EUROMAP / SPI / JIS
EUROMAP / SPI / JIS
EUROMAP / SPI / JIS
Ejector holes
EUROMAP / SPI / JIS
EUROMAP / SPI / JIS
EUROMAP / SPI / JIS
Proximity sensors
2 / side
2 / side
2 / side
CSS - Current Sensor System
Standard
Standard
Standard
MSD - Magnetic Saturation System
Standard
Standard
Standard
RFR real force reading
Standard
Standard
Standard
Machine integration
E-stop / EUROMAP 70.0 / EUROMAP 70.1 / RS-485 / CANBus
E-stop / EUROMAP 70.0 / EUROMAP 70.1 / RS-485 / CANBus
E-stop / EUROMAP 70.0 / EUROMAP 70.1 / RS-485 / CANBus

 *The declared magnetic performance has been calculated with full coverage of each pole, on ground surface mild steel at min. thickness required

Supply spec:
» Magnetic mold clamping platens fixed and moving side
» IPSA rated cabinet for main control center/panel
» Operator interface pendant
» All interface and power supply cables
» Self checking prox
» Instruction manual and Electrical diagrams
» Testing Certificate
» Mounting hardware
» Tool kit (prox adjustment tool and prox adjustment gauge)
» Replaceable locating ring

Options on request:
» SDS – Slide Detection System
» TRS – Tool Recovery System
» Stainless steel surface plate option
» Mold data input with baseline testing and recording
» MBP 50 (AT) 30 mm thickness
» 180°C / 356 °F
» MI – Multiple Injection Option
» RFM – Removable Full Metallic Surface
» Additional operator interface pendant
» Available control option – allows loading the mold one half at a time when needed

» Magnet 30 mm thickness
» Vertical molding
» SLR – Side Load Roller
» RP – Rotary Platen Option
» TPM – Temperature Monitor